Energy Saving Vacuum Tray Dryer Construction with Minimal Heat Loss Insulation
Basic Properties
Trading Properties
| Working Principle: | Heat Is Conducted To The Trays Under Vacuum While Insulated Construction Keeps Losses Low, And The Evaporated Moisture Is Removed By The Vacuum Pump. | Heat Source: | Low-pressure Steam, Thermal Oil, Or Circulating Hot Water |
|---|---|---|---|
| Solvent Recovery: | Evaporated Solvent Can Be Condensed And Collected Through A Condenser And Buffer Tank | Drying Mode: | Static Tray Drying Under Vacuum With Insulated Construction |
| Sterilization: | Sterilization Can Be Performed Before Drying; No Impurities Are Introduced, Meeting GMP Requirements | Suitable Materials: | Heat-sensitive Powders And Granules Where Running Cost Matters |
| Applications: | Pharmaceutical, Chemical, Food And Electronics Industries With Continuous Drying Demand | Vacuum Environment: | Closed Chamber Isolated From The External Environment, Suitable For Toxic Or Irritating Gases |
| Highlight | Energy Saving Vacuum Tray Dryer,Heat Insulation Vacuum Tray Dryer |
||
The energy saving vacuum tray dryer places wet material in trays and dries it in a negative pressure vacuum environment created by a vacuum pump, while a heating medium is circulated between the jacket and the pipes for heat conduction drying. The evaporated moisture is removed by the vacuum pump.
The construction is insulated so that heat loss is minimal and the heat supplied by the medium is used efficiently. Combined with low-temperature drying under vacuum, this keeps energy use low while the boiling point of the material is lowered for even drying.
| Specification | FZG-15 | FZG-20 | FZG-40 |
| Inner Chamber Size (mm) | 1500×1220×1400 | 1660×1550×1420 | 1660×1550×1756 |
| Number of Drying Shelves | 8 | 8 | 10 |
| Shelf Spacing (mm) | 102 | 122 | 122 |
| Tray Dimension (mm) | 460×640×45 | 460×640×45 | 460×640×45 |
| Tray Quantity | 32 | 48 | 60 |
| Working Pressure of Drying Shelf (MPa) | ≤0.784 | ||
| Chamber Temperature (°C) | ≤150 | ||
| Chamber Vacuum Degree (Torr) | -0.1 | ||
| Vacuum Pump Model & Power (With Condenser) | 2X-70A | 2X-70A | 2X-70A |
| 5.5KW | 5.5KW | 7.5KW | |
| Vacuum Pump Model & Power (Without Condenser) | SZ-2 | SZ-2 | SZ-2 |
| 4KW | 4KW | 5KW | |
| Drying Chamber Weight (kg) | 2100 | 2200 | 2400 |
Note: The above data is for reference only. If you have any special requirements, our factory can provide design and consultation services.
Working PrincipleWet material is loaded into trays inside the sealed chamber and the vacuum pump lowers the internal pressure, so the boiling point of the material falls and drying proceeds at low temperature. A heating medium circulated between the jacket and the pipes supplies heat by conduction, and insulated construction holds that heat in, so less energy is lost to the surroundings. The evaporated moisture is then removed by the vacuum pump.
- Wet material is placed into trays inside the drying chamber.
- The vacuum pump creates a negative pressure vacuum environment.
- A heating medium is introduced between the jacket and the pipes for heat conduction drying.
- The moisture evaporated from the material is removed by the vacuum pump.
- Recovered solvent is condensed and collected through a condenser and a buffer tank.
- Insulated construction keeps heat loss to a minimum.
- Heat conducted through the jacket and internal pipes.
- Low-temperature drying under vacuum reduces energy demand.
- Heat source can be low-pressure steam, thermal oil or circulating hot water.
- Static tray drying preserves the shape of the dried material.
- Sterilization before drying with no impurities introduced, meeting GMP requirements.
It is suitable for low-temperature drying of heat-sensitive materials and is widely used in the pharmaceutical, chemical, food and electronics industries, especially where drying runs continuously and running cost matters.
- Continuous drying where running cost matters.
- Pharmaceutical, chemical, food and electronics industries.
- Heat-sensitive materials that require low-temperature drying.

Contact Person: Mr. Zuo
Tel: +86 15051989720
Fax: 86--15051989720