Static Vacuum Shelf Dryer Preserving Original Shape of Fragile Granular Dried Materials
Basic Properties
Trading Properties
| Working Principle: | Wet Material Rests In Trays And Is Dried Under Vacuum Without Agitation, With Heat Conducted Through The Jacket And Pipes And Moisture Removed By The Vacuum Pump. | Heat Source: | Low-pressure Steam, Thermal Oil, Or Circulating Hot Water |
|---|---|---|---|
| Solvent Recovery: | Evaporated Solvent Can Be Condensed And Collected Through A Condenser And Buffer Tank | Drying Mode: | Static Tray Drying Under Vacuum; As A Static Vacuum Dryer The Shape Of The Dried Material Is Not Damaged |
| Sterilization: | Sterilization Can Be Performed Before Drying; No Impurities Are Introduced, Meeting GMP Requirements | Suitable Materials: | Fragile, Easily Damaged Granules, Crystals And Shaped Particles |
| Applications: | Pharmaceutical, Chemical, Food And Electronics Industries Where Shape Retention Matters | Vacuum Environment: | Closed Chamber Isolated From The External Environment, Suitable For Toxic Or Irritating Gases |
| Highlight | Static Vacuum Shelf Dryer,Granular Vacuum Shelf Dryer |
||
The static vacuum tray dryer places wet material in trays and dries it under a negative pressure vacuum environment created by a vacuum pump, while a heating medium is circulated between the jacket and the pipes for heat conduction drying. The moisture evaporated from the material is removed by the vacuum pump.
As a static vacuum dryer, the material is not tumbled or agitated during drying, so the shape of the dried material is not damaged. This makes the machine a good fit for fragile granules, crystals and shaped particles that must keep their original form while they dry.
| Specification | FZG-15 | FZG-20 | FZG-40 |
| Inner Chamber Size (mm) | 1500×1220×1400 | 1660×1550×1420 | 1660×1550×1756 |
| Number of Drying Shelves | 8 | 8 | 10 |
| Shelf Spacing (mm) | 102 | 122 | 122 |
| Tray Dimension (mm) | 460×640×45 | 460×640×45 | 460×640×45 |
| Tray Quantity | 32 | 48 | 60 |
| Working Pressure of Drying Shelf (MPa) | ≤0.784 | ||
| Chamber Temperature (°C) | ≤150 | ||
| Chamber Vacuum Degree (Torr) | -0.1 | ||
| Vacuum Pump Model & Power (With Condenser) | 2X-70A | 2X-70A | 2X-70A |
| 5.5KW | 5.5KW | 7.5KW | |
| Vacuum Pump Model & Power (Without Condenser) | SZ-2 | SZ-2 | SZ-2 |
| 4KW | 4KW | 5KW | |
| Drying Chamber Weight (kg) | 2100 | 2200 | 2400 |
Note: The above data is for reference only. If you have any special requirements, our factory can provide design and consultation services.
Working PrincipleWet material rests in trays inside the sealed chamber and the vacuum pump lowers the internal pressure, so the boiling point of the material falls and drying proceeds gently at low temperature. A heating medium circulated between the jacket and the pipes supplies heat by conduction, and the evaporated moisture is drawn out by the vacuum pump. Because the load never moves, the material dries in place and the original shape of the dried product is preserved.
- Wet material is placed into trays inside the drying chamber.
- The vacuum pump creates a negative pressure vacuum environment.
- A heating medium is introduced between the jacket and the pipes for heat conduction drying.
- The moisture evaporated from the material is removed by the vacuum pump.
- Recovered solvent is condensed and collected through a condenser and a buffer tank.
- Static tray drying: the shape of the dried material is not damaged.
- Dries under vacuum so the boiling point of the material is lowered.
- Even heating of the material through jacket and pipe conduction.
- Sealed chamber isolated from the external environment.
- Heat source can be low-pressure steam, thermal oil or circulating hot water.
- Sterilization before drying with no impurities introduced, meeting GMP requirements.
It is suitable for low-temperature drying of heat-sensitive and fragile materials and is widely used in the pharmaceutical, chemical, food and electronics industries wherever the original shape of the product must be preserved.
- Fragile granules, crystals and shaped particles.
- Pharmaceutical, chemical, food and electronics industries.
- Products whose original shape must be preserved during drying.

Contact Person: Mr. Zuo
Tel: +86 15051989720
Fax: 86--15051989720