WhatsApp
8615051989720
Wechat
WeChat QR Code
Scan QR Code

SUS304 Industrial Spray Dryer Machine For Alumina Magnesium Oxide Talc Powder

Basic Properties

Place of Origin:China
Brand Name:XIANZHU
Certification:ISO 9001:2015
Model Number:LPG

Trading Properties

Minimum Order Quantity:1 unit
Price:Negotiable
Standard Packaging:Export wooden case with anti-rust protection
Delivery Time:20-30 working days
Payment Terms:T/T; L/C
Supply Ability:5 units per month
Specifications
Product Type: High Speed Centrifugal Spray Dryer Machine Atomization: High-speed Centrifugal Atomizer Mounted At Tower Top
Air Flow: Parallel Flow (co-current) With Spiral Hot Air Distribution Drying Time: Several Seconds; 95%-98% Of Water Evaporated Instantly
Feed Moisture: 40%-60% (up To 90% For Special Materials) Powder Collection: Cyclone Separator + Bag Filter, Continuous Bottom Discharge
Temperature Control: Automatic Inlet Air Temperature Control Final Product: Uniform Free-flowing Powder, No Crushing Or Screening Needed
Chamber Material: SUS304 Stainless Steel
Highlight

Industrial Spray Dryer Machine

,

Alumina Spray Dryer Machine

,

SUS304 Industrial Spray Dryer

Product Description

This ceramic grade centrifugal spray dryer machine converts alumina, magnesium oxide, talc and ceramic tile material slurries into uniform, free-flowing powder granules ready for pressing and forming. Ceramic slurries with 40% to 60% moisture are atomized by the high-speed centrifugal atomizer and dried in parallel hot air flow within seconds, which fixes each droplet as a dense spherical granule with consistent size. Because the powder leaves the tower already dry and free flowing, ceramic plants can skip crushing and screening and feed the granulated powder directly to the press, improving both product consistency and production efficiency.

Key Features
  • Granule uniformity for pressing: each atomized droplet becomes a spherical granule with narrow size distribution, improving die filling and pressed green density.
  • Instant high solids drying: 95%-98% of the water is removed in seconds, so fine ceramic powders do not re-agglomerate or harden into lumps.
  • No crushing or screening: the dried product is discharged ready to use, reducing process steps and protecting particle integrity.
  • Adjustable granule size: particle diameter, looseness and residual moisture are controlled by operating conditions within a certain range.
  • High throughput continuous operation: simple procedures and automatic temperature control support stable, round the clock ceramic production.
  • Durable powder collection: the cyclone separator and bag filter recover abrasive ceramic fines continuously, keeping the work area clean.
Technical Specifications
ParameterSpecification
Product typeHigh speed centrifugal spray dryer machine (LPG series)
AtomizationHigh-speed centrifugal atomizer
Air flow patternParallel flow, spiral hot air distribution from top distributor
Feed moisture40%-60%, up to 90% for special slurries
Drying timeSeveral seconds (95%-98% water evaporated instantly)
Powder collectionCyclone separator + bag filter
Chamber materialSUS304 stainless steel
DischargeContinuous from drying tower bottom
OperationAutomatic temperature control, direct to press granulation
Working Principle

Air is first filtered and heated, then enters the air distributor at the top of the drying tower, where it spirals evenly down into the drying chamber. The liquid feed is pumped to a high-speed centrifugal atomizer mounted at the top of the tower and is atomized into extremely fine droplets, which come into contact with the hot air in a parallel flow. Water on the surface of the droplets evaporates almost instantly, so the material is dried into a finished powder in only a few seconds. The finished product is discharged continuously from the bottom of the drying tower and collected through a cyclone separator and a bag filter, while the exhaust gas is vented by an induced draft fan. Because the whole drying step is so short, the machine is especially suitable for heat sensitive materials.

Applications

This machine is used in the ceramics and refractory industry for spray drying alumina, ceramic tile materials, magnesium oxide, talc, zirconium silicate and other ceramic body and glaze slurries into pressable powder granules. It serves sanitary ware, tile, insulator, refractory and advanced ceramic producers who need consistent granule size, flow ability and moisture for automatic pressing, as well as fine chemical and metallurgical plants drying oxide powders with the same granulation requirement.

Contact Details
Changzhou Xianzhu Drying Equipment Co., Ltd.

Contact Person: Mr. Zuo

Tel: +86 15051989720

Fax: 86--15051989720

Send your inquiry directly to us
(0/3000)