WhatsApp
8615051989720
Wechat
WeChat QR Code
Scan QR Code

Polymer Emulsion Resin Spray Dryer Machine For PVC Polyethylene Resin Powder Drying

Basic Properties

Place of Origin:China
Brand Name:XIANZHU
Certification:ISO 9001:2015
Model Number:LPG

Trading Properties

Minimum Order Quantity:1 unit
Price:Negotiable
Standard Packaging:Export wooden case with anti-rust protection
Delivery Time:20-30 working days
Payment Terms:T/T; L/C
Supply Ability:5 units per month
Specifications
Product Type: High Speed Centrifugal Spray Dryer Machine Atomization: High-speed Centrifugal Atomizer Mounted At Tower Top
Air Flow: Parallel Flow (co-current) With Spiral Hot Air Distribution Drying Time: Several Seconds; 95%-98% Of Water Evaporated Instantly
Feed Moisture: 40%-60% (up To 90% For Special Materials) Powder Collection: Cyclone Separator + Bag Filter, Continuous Bottom Discharge
Temperature Control: Automatic Inlet Air Temperature Control Final Product: Uniform Free-flowing Powder, No Crushing Or Screening Needed
Chamber Material: SUS304 Stainless Steel
Highlight

Emulsion Spray Dryer Machine

,

Polymer Spray Dryer Machine

Product Description

This centrifugal spray dryer machine answers a specific need in the plastics and resin industry: converting polymer emulsions, polyvinyl chloride and polyethylene latices into dry, free-flowing powders in one continuous step. Liquid emulsion with 40% to 60% moisture, or up to 90% for special formulations, is atomized into fine droplets by the high-speed centrifugal atomizer and dried by parallel hot air flow in only a few seconds. The short residence time keeps the polymer from overheating or degrading, while the gentle drying action preserves particle shape so the powder re-disperses and flows well in downstream compounding.

Key Features
  • One step emulsion drying: polymer emulsions and latices are turned directly into powder, eliminating coagulation, washing, filtration and re-drying steps.
  • Heat sensitive polymer safety: total drying takes only seconds, so PVC and polyethylene grades stay below degradation temperature during processing.
  • Free flowing powder: final particles have good uniformity, flow ability and solubility, ideal for dry blending and compounding lines.
  • Tunable particle properties: particle diameter, looseness and residual moisture can be adjusted through operating conditions within a certain range.
  • High recovery efficiency: the cyclone separator and bag filter capture fine powder continuously, minimizing product loss on expensive polymers.
  • Automated batch control: simple procedures and easy operation allow stable round the clock production with consistent powder quality.
Technical Specifications
ParameterSpecification
Product typeHigh speed centrifugal spray dryer machine (LPG series)
AtomizationHigh-speed centrifugal atomizer
Air flow patternParallel flow, spiral hot air distribution from top distributor
Feed moisture40%-60%, up to 90% for special formulations
Drying timeSeveral seconds (95%-98% water evaporated instantly)
Powder collectionCyclone separator + bag filter
Chamber materialSUS304 stainless steel
DischargeContinuous from drying tower bottom
OperationAutomatic temperature control, one-step drying without crushing
Working Principle

Air is first filtered and heated, then enters the air distributor at the top of the drying tower, where it spirals evenly down into the drying chamber. The liquid feed is pumped to a high-speed centrifugal atomizer mounted at the top of the tower and is atomized into extremely fine droplets, which come into contact with the hot air in a parallel flow. Water on the surface of the droplets evaporates almost instantly, so the material is dried into a finished powder in only a few seconds. The finished product is discharged continuously from the bottom of the drying tower and collected through a cyclone separator and a bag filter, while the exhaust gas is vented by an induced draft fan. Because the whole drying step is so short, the machine is especially suitable for heat sensitive materials.

Applications

This machine is designed for drying polymer emulsions, polyethylene, polyvinyl chloride, acrylic latices and other plastic and resin intermediates into powder form. Typical end uses include emulsion polymerization plants, PVC resin producers, plastic additive manufacturers and compounding houses that need a consistent, free-flowing powder with a narrow particle size distribution. The closed powder path and stainless steel contact surfaces also suit specialty resin grades that must stay free of contamination.

Contact Details
Changzhou Xianzhu Drying Equipment Co., Ltd.

Contact Person: Mr. Zuo

Tel: +86 15051989720

Fax: 86--15051989720

Send your inquiry directly to us
(0/3000)