Spray Dryer Case Study for Food Industry Milk Powder Egg White Drying Project
Project Background
A food ingredient processor needed to dry liquid food materials into stable powder without losing flavour or nutritional value. The company handled milk powder, egg white and animal blood meal, and it also produced instant beverages and plant based ingredients for export markets. Because these materials are heat sensitive, a long or uneven drying cycle would damage colour, taste and solubility, so the drying method had to be fast and gentle at the same time.
Customer Challenge
- The liquid feed had a high moisture content and had to be turned into powder in one pass.
- Milk, egg white and blood meal lose quality if they are exposed to heat for too long.
- The finished powder had to be uniform, free flowing and highly soluble for the end user.
- Production had to stay simple and easy to control across several different products.
Solution: Food Grade Centrifugal Spray Dryer
The food grade centrifugal spray dryer machine was chosen. Air is filtered and heated before entering the air distributor at the top of the dryer, where it spirals evenly into the drying chamber. The liquid feed is atomized into extremely fine droplets by a high-speed centrifugal atomizer at the top of the tower, and the droplets meet the hot air in a parallel flow.
Because the material liquid is atomized, its surface area increases greatly. In the hot air flow, 95%-98% of the water can be evaporated at a moment, and the time of completing the drying is only several seconds. This is especially suitable for drying heat sensitive materials. The finished product is continuously discharged from the bottom of the drying tower, through a cyclone separator and a bag filter, while the exhaust gas is vented by an induced draft fan.
Process Parameters
| Parameter | Specification |
|---|---|
| Feed form | Solution, emulsion, suspension or pumpable paste |
| Feed moisture content | 40%-60% (for special materials the content might be up to 90%) |
| Drying speed | 95%-98% of water evaporated at a moment, in several seconds |
| Atomization | High-speed centrifugal atomizer at the top of the tower |
| Powder collection | Cyclone separator and bag filter with continuous discharge |
| Post-drying treatment | No smashing and sorting required |
| Powder properties | Good uniformity, flowability and solubility; high purity |
Results
- The final product owned good uniformity, flowability and solubility, and was high in purity and good in quality.
- The liquid, with a moisture content of 40%-60% (up to 90% for special materials), was dried into powder or granular product in one pass.
- With no need for smashing and sorting after drying, the operation procedures were reduced and product purity was enhanced.
- Particle diameters, looseness and water content could be adjusted within a certain range, making control and management very convenient.
Conclusion
The food ingredient processor successfully dried milk powder, egg white and animal blood meal, and the same line also handled coffee, instant tea, seasonings, meat, protein, soybeans and hydrolysates, together with carbohydrates such as corn starch, pectin and maltose. The one-step process kept the delicate flavour and nutrition intact while delivering a uniform, highly soluble powder. For special requirements, the factory can provide consultation and design services to match each food material and target powder specification.
Contact Person: Mr. Zuo
Tel: +86 15051989720
Fax: 86--15051989720